You won't lose any data from removing your hdd and putting it back later. If you are really worried about it, you can backup your savegames. That's a smart thing to do anyway since hdd's do fail over time. But it's not needed for what you are doing now. 4.
Step 6. Lift the top cover from its rear edge and rotate it toward the front of the PS3. Remove the top cover. There is a plastic hook located in a hole on the top back right hand side corner. Carefully push the plastic hook a bit from the rear of the machine with a spudger to release the rear right of the casing. 7 comments.
Sony discontinued them when the Slim and Super Slim PS3s were released, and unfortunately, I can personally say that I’ve had the experience of having my trusty launch 60GB PS3 give up the ghost
Use the Phillips screwdriver as well as the flat blade screwdriver. Pull out the power plug. Use the flat blade screwdriver to unscrew, and remove the panel. Remove all the screws from the case. Also, remove the data cable ribbon. Remove the metal frame of the Blu-ray drive.
The Ps3 Super slim has 12gb flash memory, so you shouldn't have to install any firmware. The custom firmware should be fine. You can purchase a hard drive bracket/caddy from amazon that will work with any 2.5 sata hard drive that is 1 tb or less. moep123.
So I've had my ps3 super slim for 4 months now and it's filled with dust. Could anyone tell me a guide on how to safely clear it out? Thanks.
Your best bet would be to get a keyboard duster or "canned-air" as I call it, and blow in the back, front, and side vents of the PS3. This should dislodge most if not all the major dust inside the system. Keep a vacuum nearby to suck the large dust clumps that come out. Keep going around the sides until it doesn't blow dust from the other orifices.
zKo5hor.